Edimax WAP1750 Uživatelský manuál Strana 124

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 232
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 123
Edimax Pro NMS
118
channel selection will automatically set the
wireless channel for the access point’s 2.4GHz
or 5GHz frequency based on availability and
potential interference. When disabled, select
a channel manually.
Auto Pilot Range
Select a range from which the auto channel
setting (above) will choose a channel.
Auto Pilot Interval
Specify a frequency for how often the auto
channel setting will check/reassign the
wireless channel. Check/uncheck the “Change
channel even if clients are connected” box
according to your preference.
Channel Bandwidth
Set the channel bandwidth or use Auto
(automatically select based on interference
level).
BSS BasicRateSet
Set a Basic Service Set (BSS) rate: this is a
series of rates to control communication
frames for wireless clients.
These settings are for experienced users only. Please do not change any of the
values on this page unless you are already familiar with these functions.
Changing these settings can adversely affect the performance of
your access point.
Advanced Settings
Contention Slot
Select “Short” or “Long” – this value is used for
contention windows in WMM (see IV-6-7.
WMM).
Preamble Type
Set the wireless radio preamble type. The
preamble type in 802.11 based wireless
communication defines the length of the CRC
(Cyclic Redundancy Check) block for
communication between the access point and
roaming wireless adapters. The default value is
“Short Preamble”.
Guard Interval
Set the guard interval. A shorter interval can
improve performance.
Zobrazit stránku 123
1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 231 232

Komentáře k této Příručce

Žádné komentáře