3 1-3 System Requirements Computer (with Fast Ethernet adapter or wireless adapter) running Windows98/2000/XP/Vista/7, Linux, Mac OS Web brow
4 1-4 Package Contents Before you starting to use this access point, please check if there‟s anything missing in the package, and contact your dealer
5 1-5 Familiar with your new wireless access point Upper Panel LED Color Status Description PWR (Power) Green Lit Power is supplied. Off No Power.
6 Back Panel Antenna Connector Item Name Description Antenna 1 reserve SMA antenna connectors for screwing 3dBi detachable antennas enclosed
7 Chapter II: System and Network Setup 2-1 Installing the access point to your Network Please follow the following instruction to build the network
8 2-2 Connecting to wireless access point by web browser After the network connection is built, the next step you should do is setup the access poi
9 2. Select „Specify an IP address‟, then input the following settings in respective field: IP address: 192.168.2.2 Subnet Mask: 255.255.255.0 cli
10 2-2-2 Windows 2000 IP address setup 1. Click „Start‟ button (it should be located at lower-left corner of your computer), then click control pa
11 2. Select „Use the following IP address‟, then input the following settings in respective field: IP address: 192.168.2.2 Subnet Mask: 255.255.25
12 2-2-3 Windows XP IP address setup 1. Click „Start‟ button (it should be located at lower-left corner of your computer), then click control pane
COPYRIGHT Copyright © 2008/2009 by this company. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored
13 2. Select „Use the following IP address‟, then input the following settings in respective field: IP address: 192.168.2.2 Subnet Mask: 255.255.25
14 2-2-4 Windows Vista IP address setup 1. Click „Start‟ button (it should be located at lower-left corner of your computer), then click control pa
15 2. Select „Use the following IP address‟, then input the following settings in respective field: IP address: 192.168.2.2 Subnet Mask: 255.255.25
16
17 2-2-5 Connecting to Web Management Interface All functions and settings of this access point must be configured via web management interface. Plea
18 NOTE: If you can’t see the web management interface, and you’re being prompted to input user name and password again, it means you
19 2-3 View System Status and Information After you connected to the access point by web browser, the first thing you see is „Status and Information‟
20 this wireless access point) Channel Number Displays current wireless channel number Security Displays current wireless security setting BSSID D
21 2-4 Select an Operating Mode for Wireless Access Point This access point can be operated in different modes; you can click „Basic Setting‟ on the
22 bridge-dedicated mode, and will be able to accept wireless clients while the access point is working as a wireless bridge. Universal Repeater This
Federal Communication Commission Interference Statement FCC Part 15 This equipment has been tested and found to comply with the limits for a Class B
23 2-4-1 AP Mode This is the most common mode. When in AP mode, this access point acts as a bridge between 802.11b/g/Draft-N wireless devices and wir
24 THAT ESSID IS CASE SENSITIVE. Multiple ESSID The access point supports multiple SSID function; up to four SSIDs can be set. If you want to configur
25 2-4-1-1 Multiple ESSID This access point supports four SSIDs. Except the main SSID (It can be configure in Basic Setting page), you can configure
26 ESSID of your wireless access point can get connected. WMM WMM (Wi-Fi Multimedia) technology, which can improve the performance of certain network
27 If you want to allow 802.11b, 802.11g, and 802.11 Draft-N clients to connect to this access point, select 2.4GHz (B+G+N). Main ESSID Please input
28 2-4-2-1 Wireless Site Survey The table will list the access points nearby as the access point is set to Station mode
29 Here are descriptions of every setup item: Select Click the radio button to select the access point. SSID Display the SSID name of the access poi
30 both wireless access points will be connected together. You can use this mode to connect a network to another network which is physically isolated.
31 The channel number must be same with another wireless access point you wish to connect MAC address 1 Please input the MAC address of the wireless a
32 2-4-4 AP Bridge-Point to Multi-Point Mode In this mode, this wireless access point will connect to up to four wireless access points which uses th
Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. Federal C
33 will be able to connect to this access point. If you select 2.4GHz (B+G), then only wireless clients using 802.11b and 802.11g band will be able t
34 2-4-5 AP Bridge-WDS Mode In this mode, this wireless access point will connect to up to four wireless access points which uses the same mode, and
35 clients using 802.11b and 802.11g band will be able to connect to this access point. If you want to allow 802.11b, 802.11g, and 802.11 Draft-N c
36 You can click „Continue‟ button to back to previous page and continue on other setting items, or click „Apply‟ button to restart the wireless acces
37 you select (802.11b, 802.11 Draft-N, or 802.11g) will be able to connect to this access point. If you select 2.4GHz (B+G), then only wireless clie
38 After you finish with setting, please click „Apply‟, and the following message will be displayed: When you see this message, the settings you m
39 2-5 WPS Setting Wi-Fi Protected Setup (WPS) is the simplest way to build connection between wireless network clients and this access point. You do
40 Here are descriptions of every setup item: Enable WPS Check this box to enable or disable WPS function Wi-Fi Protected Setup Information All info
41 WPS-enabled wireless devices. SSID: Displays the SSID (ESSID) of this access point. Authentication Mode: The wireless security authentication mod
42 NOTE: When you’re using PBC type WPS setup, you must press ‘PBC’ button (hardware or software) of wireless client within 120 seconds; if you di
R&TTE Compliance Statement This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of
43 2-6 Advanced Wireless Settings This wireless access point has many advanced wireless features. Please note that all settings listed here are for e
44 modify default value if you don’t know what it is, default value is 2347 Beacon Interval Set the beacon interval of wireless radio. Do not modify d
45 priority to applications which require instant responding. Therefore you can improve the performance of such network applications. CTS Protect Ena
46 2-7 Wireless Security This wireless access point provides many types of wireless security (wireless data encryption). When you use data encryption
47 There are four types of security level you can select: Disable (no security - data encryption disabled), WEP, WPA Pre-shared Key, and WPA Radiu
48 2-7-1 Disable Security Select the SSID you wish to configure. When you select „Disable‟, wireless encryption for the network is disabled. After
49 2-7-2 WEP WEP (Wired Equivalent Privacy) is a common encryption mode, it‟s safe enough for home and personal use. But if you need higher level of
50 length of WEP key is 10 characters. Default Tx Key You can set up to four sets of WEP key, and you can decide which key is being used by default he
51 2-7-3 WPA Pre-shared Key WPA Pre-shared key is the safest encryption method currently, and it‟s recommended to use this encryption method to ensur
52 When you see this message, the settings you made is successfully save. You can click „Continue‟ button to back to previous page and continue on o
C A T A L O G Chapter I: Product Information ... 1 1-1 Product Introduction ...
53 2-7-4 WPA RADIUS WPA Radius is the combination of WPA encryption method and RADIUS user authentication. If you have a RADIUS authentication server
54 After you finish with setting, please click „Apply‟, and the following message will be displayed: When you see this message, the settings you ma
55 2-8 Radius Server Comparing to other wireless security measures, radius server provides user-based authentication. If your wireless client support
56 input username, password, re-type password in corresponding field, and click „Add‟ button to add the user to radius server database. You can click
57 other setting items, or click „Apply‟ button to restart the wireless access point and the changes will take effect after about 30 seconds.
58 2-9 MAC Filtering Another security measure you can use to keep hackers and intruders away is „MAC filtering‟. You can pre-define a so-called „whit
59 Access Control if unchecked, no restriction will be enforced (any wireless client with proper encryption setting will be able to connect to this wi
60 2-10 System Utilities This access point provides some control functions include password, IP address management, and DHCP server function. Please
61 2-10-2 IP Address of the Wireless Access Point You can change the IP address of this wireless access point, so it can become a part of your local
62 After you finish, please go to the bottom of this page and click „Apply‟, and the following message will be displayed: When you see this message
2-10-2 IP Address of the Wireless Access Point ... 61 2-10-3 DHCP Server ...
63 2-10-3 DHCP Server This wireless access point is capable to act as a DHCP server for your network, and it‟s disabled by default. If you want to ac
64 displayed: When you see this message, the settings you made is successfully save. You can click „Continue‟ button to back to previous page and c
65 Chapter III: Advanced Configuration 3-1 Configuration Backup and Restore You can backup all configurations of this access point to a file, so you
66 3-2 Firmware Upgrade If there are new firmware of this wireless access point available, you can upload the firmware to the access point to change
67 3-3 Reset When you think the access point is not working properly, you can use this function to restart the access point; this may help and solve
68 Chapter IV: Appendix 4-1 Hardware Specification Chipset : Realtek 8196C + 8188CE Flash: 2MB SDRAM: 16MB LAN Port: 10/100M UTP Port x 5 Antenn
69 4-2 Troubleshooting If you found the access point is working improperly or stop responding to you, don‟t panic! Before you contact your dealer of
70 please check the status of A/C power adapter, and make sure it‟s correctly powered. I can‟t locate my access point by my wireless client a. „Broa
71 4-3 Glossary Default Gateway (Access point): Every non-access point IP device needs to configure a default gateway‟s IP address. When the device s
72 1‟s followed by consecutive trailing 0‟s, such as 11111111.11111111.11111111.00000000. Therefore sometimes a network mask can also be described sim
1 Chapter I: Product Information 1-1 Product Introduction Thank you for purchasing this wireless access point! With this high cost-efficiency wirele
73 Application Protocol Port Number Telnet TCP 23 FTP TCP 21 SMTP TCP 25 POP3 TCP 110 H.323 TCP 1720 SNMP UCP 161 SNMP Trap UDP 162 HTTP TCP 80 PPTP T
74 Unreliable Datagram Protocol (UDP). TCP/IP is the standard protocol for data transmission over the Internet. Both TCP and UDP are transport layer p
75
2 1-2 Safety Information In order to keep the safety of users and your properties, please follow the following safety instructions: 1. This access p
Komentáře k této Příručce