
39
you are familiar with this setting.
Set the RTS threshold of the wireless radio. The default
value is 2347 - please do not modify unless you are
familiar with this setting.
Set the beacon interval of the wireless radio. The
default value is 100 - please do not modify unless you
are familiar with this setting.
Set the DTIM period of wireless radio. The default
value is 3 - please do not modify unless you are
familiar with this setting.
Set the wireless data transfer rate. The default is set to
Auto - please do not modify unless you are familiar
with this setting.
Set the data rate of 802.11n. The default is set to Auto
- please do not modify unless you are familiar with
this setting.
Select wireless channel width (bandwidth used by
wireless signals from the access point) – the
recommended value is Auto 20/40MHz please do not
modify unless you are familiar with this setting.
Set the wireless radio preamble type. The default value
is “Short Preamble” - please do not modify unless you
are familiar with this setting.
Set if the access point will broadcast its own ESSID. To
hide the ESSID of your access point select “Disable” -
only users who know the ESSID of your access point will
be able to connect.
WMM (Wi-Fi Multimedia) technology can improve the
performance of certain network applications, such as
audio/video streaming, network telephony (VoIP), and
others. When WMM is enabled, the access point will
prioritize different kinds of data and give higher priority
to applications which require instant responses. This
improves the performance of such network
applications.
Enabling this setting will reduce the chance of radio
signal collisions between 802.11b and 802.11g wireless
access points. It’s recommended to set this option to
“Auto”.
Set the power output of the wireless radio. Unless
you’re using the access point in a very large space, you
Komentáře k této Příručce